PT Cruiser L4-2.4L Turbo VIN 8 (2005)
3. Loosen the upper and lower torque strut attaching bolt at the suspension crossmember and shock tower bracket (Fig. 102).
4. The engine position may now be adjusted by positioning a suitable floor jack on the forward edge of the transmission bell housing (Fig. 105).
NOTE: The floor jack must be positioned as shown in (Fig. 105) to prevent minimal upward lifting of the engine.
5. With the engine supported, remove the upper and lower torque strut attachment bolt(s) at shock tower bracket and suspension crossmember (Fig.
102). Verify that the torque struts are free to move within the shock tower bracket and crossmember. Reinstall the torque strut bolt(s), but do not
tighten.
