PT Cruiser L4-2.4L Turbo VIN 8 (2005)
^
Replace oil cooler seal
^
Lubricate seal and position oil cooler to oil filter adapter, aligning notch to tab
^
Install oil cooler connector bolt. Torque connector bolt to 55 Nm (41 ft. lbs.)
6. Install oil drain plug and oil filter.
7. Install structural collar.
8. Install lower torque strut.
9. Turbocharger Equipped Vehicles: Install turbocharger to charge air cooler hose assembly.
10. Lower vehicle and fill engine crankcase with proper oil to correct level.
