PT Cruiser L4-2.4L Turbo VIN 8 (2005)
11. Reposition throttle cable bracket (Fig. 145).
12. Remove intake manifold cover.
NOTE: To remove intake manifold cover, start with clips near throttle body.
13. Disconnect brake booster hose and PCV hose from intake manifold (Fig. 146).
14. Disconnect purge solenoid hose from throttle body (Fig. 146).
15. Remove intake manifold cover.
16. Remove upper intake manifold support bracket (Fig. 147).
17. Remove upper intake manifold fasteners (Fig. 152).
18. Remove upper intake manifold.
19. If further service is required, cover the lower intake manifold openings to prevent foreign materials from entering the engine (Fig. 139).
CLEANING
1. Discard gasket(s).
2. Clean all sealing surfaces.
INSPECTION
1. Inspect manifold for cracks, distortion, or mounting surface warpage. Replace manifold if necessary.
