PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Instrument Panel Bulb: Service and Repair
REMOVAL
Turn Signal Indicator Lamps
Turn Signal Lamp(s) - Remove/Install
Instrument Cluster Illumination Bulbs
The instrument cluster turn signals and the high beam indicator are serviceable indicators. The instrument cluster must first be removed to replace the
high beam indicator. Then the defective bulb and socket turns out counterclockwise. The instrument cluster bezel needs to be removed to access the turn
signal indicators. If any of the other indicators are burned out, the entire cluster must be replaced.
The cluster illumination bulbs are serviceable and may be replaced once the instrument cluster is removed.
INSTALLATION
The illumination bulbs are serviceable. The bulb and socket turn in clockwise. Then the instrument cluster may be installed.
After servicing the indicator (high beam only), install the instrument cluster After replacing the turn signal bulb(s), install the, Refer to Instrument
Cluster/Carrier Cluster Bezel. See: Service and Repair/Cluster Bezel