PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Console Lamp: Service and Repair
Center Console Flood Lamp Replacement
REMOVAL
1. Open hood.
2. Disconnect and isolate the battery negative cable.
Center Console Flood Lamp Location
3. Insert a small screwdriver into notch by clip and gently pry out unit.
4. Slide back rear cover to expose bulb.
5. Replace bulb.
INSTALLATION
1. Insert new bulb.
2. Gently secure bulb back into slot.
NOTE: When installing the retainer, ensure that the forward tabs are inserted properly into the slots in the instrument panel.
3. Connect the battery negative cable.
4. Close hood.
5. Verify vehicle and system operation.
