PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Fog/Driving Lamp Bulb: Service and Repair
REMOVAL
Fog Lamp
1. Reach behind the lower splash shield to gain access to the rear of the fog lamp.
2. Disconnect wire connector from fog lamp.
3. Remove bulb from lamp.
INSTALLATION
CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
1. Install bulb into lamp.
2. Connect wire connector to the fog lamp. Test operation of lamp.
3. Install splash shield attaching fasteners.
