PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Fig. 34 Slash Shield
7. Remove the rear half of the inner splash shield (Fig. 34).
NOTE: Drain fuel tank if it is more than half full.
Fig. 35 Filler Tube
8. Disconnect fuel filler tube hose from fuel tank neck (Fig. 35). Remove fuel filler tube assembly
INSTALLATION
1. Install fuel filler tube. Connect fuel filler tube hose to fuel tank neck and tighten clamp to 4.1 Nm (38 in. lbs.) (Fig. 35).
2. Install the rear half of the inner splash shield (Fig. 34).
3. Lower vehicle.
4. Install fuel filler neck screws and tighten to 2.7 Nm (24 in. lbs.) (Fig. 33).
5. Install fuel filler tube cap.
6. Install the negative battery cable.
7. Install the air cleaner lid and makeup air hose.