PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Fuel Gauge Sender: Service and Repair
FUEL LEVEL SENDING UNIT / SENSOR
REMOVAL
1. Remove fuel pump module. Refer to Fuel Pump Module.
Fig. 1 Fuel Pump/Level Sensor Electrical Connector
2. Depress retaining tab and remove the fuel pump/level sensor connector from the BOTTOM of the fuel pump module electrical connector (Fig. 1).
NOTE: The pump module harness on TOP of flange is not serviceable or removable.
Fig. 2 Wedge Lock
3. Remove the wedge lock from the electrical connector (Fig. 2)
