chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Engine Controls - Various Driveability Concerns|Page 4281 > < Recall - Reprogram PCM for Emissions|Page 4275
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - Various Driveability Concerns

NUMBER: 18-007-07

GROUP: Vehicle Performance

DATE: February 1, 2007

THE FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.

StarSCAN(R) SOFTWARE LEVEL MUST BE AT RELEASE 7.03 OR HIGHER FOR THIS BULLETIN.

DRBIII(R) SOFTWARE LEVEL MUST BE AT THE LATEST RELEASE FOR THIS BULLETIN.

SUBJECT:

Flash: Driveability Improvements

OVERVIEW:

This bulletin involves reprogramming the Powertrain Control Module (PCM) with new software.

MODELS:

2005 - 2007

(PT)

PT Cruiser

NOTE

This bulletin applies to vehicles built before January 22, 2007 (MDH0122XX).

SYMPTOM/CONDITION:

A number of improvements have been made to address the following:

1.

2006/2007 Models with 2.4L Turbo / Manual Transmission - Surge during light to moderate throttle acceleration in 2nd or 3rd gear following a
cold start.

2.

2006/2007 Models with Automatic Transmission - Shift Quality Improvement for 1 - 2 upshift (low speed) bump.

3.

2006/2007 Models with Automatic Transmission - Diagnostic Trouble Code (DTC) P0573 - Brake Switch # 1 Circuit High. This may be set if the
vehicle gets physically stuck in a slippery condition and while trying to get the vehicle unstuck is rocked back and forth (transmission shifted drive
to reverse to drive) without pressing the brake pedal.

4.

2006/2007 Models - Diagnostic Trouble Code (DTC) P063A - Generator Voltage Sense Circuit (Intermittent Generator Lamp Illumination).

5.

20051200612007 Models with 2.4L Turbo - Diagnostic Trouble Code (DTC) P2074 MAP/TPS Correllation.

Engine Controls - Various Driveability Concerns|Page 4281 > < Recall - Reprogram PCM for Emissions|Page 4275