PT Cruiser L4-2.4L Turbo VIN 8 (2005)
7. Inspect speed sensor O-ring (Fig. 346) and replace if necessary.
INSTALLATION
CAUTION: When disconnecting speed sensor connector, be sure that the connector weather seal does not fall off or remain in old sensor.
1. Verify O-ring is installed into position (Fig. 346).
2. Install and tighten output speed sensor to 27 Nm (20 ft. lbs.).
3. Connect speed sensor connector.
4. Install the battery tray (Fig. 344).
5. Install the battery and hold down clamp (Fig. 343).
6. Install air cleaner assembly (Fig. 342).
