Chrysler Workshop Service and Repair Manuals > PT Cruiser L4-2.4L Turbo VIN 8 (2005) > Relays and Modules | Relays and Modules - Power and Ground Distribution | Mini ISO Relay | Component Information

Page 1

Mini ISO Relay: Service and Repair

RELAY

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Remove cover from Power Distribution Center (PDC).

Relay Removal

3. Using special tool C-4817, grip the relay by the sides and pull upward with an even effort.

INSTALLATION

1. Align relay with Power Distribution Center (PDC) and press into position.
2. Install cover to PDC.
3. Connect battery negative cable.

Chrysler Workshop Service and Repair Manuals