PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Seat Belt: Service and Repair
Rear Seat Belt and Retractor
REMOVAL
1. Remove turning loop cover.
2. Remove turning loop bolt.
3. Remove upper and lower trim bezels.
4. Remove trim panel from body.
5. Remove lower seat belt anchor bolt.
6. Feed seat belt and hardware through trim openings.
7. Unbolt and remove the retractor and belt assembly.
INSTALLATION
1. Place rear seat belt retractor into position.
2. Install bolt attaching retractor. Tighten the retractor belt bolt to 40 N.m (30 ft.lbs.) torque.
3. Feed seat belt and hardware through trim opening.
4. Install lower seat belt anchor bolt. Tighten to 40 N.m (30 ft.lbs.).
5. Install trim panel.
6. Install upper and lower trim bezels.
7. Install turning loop bolts.
8. Install turning loop cover.
