PT Cruiser L4-2.4L Turbo VIN 8 (2005)
7. Remove the one retaining bolt to the seat belt retractor.
8. Remove seat belt & retractor from vehicle.
INSTALLATION
1. Position seat belt & retractor into vehicle.
2. Install the one retaining bolt to the seat belt retractor. Torque bolt to 40 N.m (30 ft.lbs.).
3. Feed the seat belt webbing through the top of the rear seat upper bolster.
4. Install the four bolts to the rear seat upper bolster.
5. Install the Lower Quarter Trim Panel.
6. Install the lower seat belt anchor nut. Torque bolt to 40 N.m (30 ft.lbs.).
7. Connect the battery negative cable.
8. Close hood.
9. Verify vehicle and system operation.