PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Seat Belt Height Adjuster: Service and Repair
WARNING: FRONT SEAT BELT ASSEMBLIES MUST BE REPLACED AFTER A COLLISION.
REMOVAL
1. Remove B-pillar trim.
Front Seat Belt Height Adjuster
2. Remove the two bolts attaching front seat belt height adjuster to B-pillar.
3. Remove front seat belt height adjuster from vehicle.
INSTALLATION
NOTE: Front seat belt height adjuster must be in the lowest position when Installing adjuster knob.
1. Place into position the front seat belt height adjuster.
2. Install bolts attaching the front seat belt height adjuster to B-pillar. Tighten all seat belt bolts to 40 N.m (30 ft.lbs.) torque.
3. Install B-pillar trim.