PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Impact Sensor: Service and Repair
Satellite Acceleration Sensor - PT27
REMOVAL
1. Open hood.
2. Disconnect and isolate the battery negative cable.
WARNING: WAIT TWO MINUTES FOR THE AIRBAG SYSTEM RESERVE CAPACITOR TO DISCHARGE BEFORE
BEGINNING ANY AIRBAG SYSTEM OR COMPONENT SERVICE. FAILURE TO DO SO MAY RESULT IN ACCIDENTAL
AIRBAG DEPLOYMENT, PERSONAL INJURY OR DEATH.
4. Remove the lower quarter trim from the appropriate side of the vehicle.
Satellite Acceleration Sensor - Remove/Install
5. Disconnect the Satellite Acceleration Sensor (SAS) electrical connector.
6. Remove the SAS retaining screws and remove the sensor from the vehicle.
INSTALLATION
