PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Power Mirror Switch: Service and Repair
Power Foldaway Mirror Switch - RHD
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the lower instrument panel bezel from under steering column.
3. Remove the instrument panel end cover retaining screws and pull rearward to release retaining clips.
Power Fold Away Mirror Switch
4. Disconnect power mirror switch electrical connector.
5. Remove the mirror switch retaining screws and remove the switch from the end cover.
INSTALLATION
1. Connect mirror switch electrical connector to switch.
2. Install switch retaining screws holding switch to end cover.
3. Install the lower instrument panel bezel.
4. Connect battery negative cable.