PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Power Mirror Switch: Testing and Inspection
Power Foldaway Mirror Switch - RHD
The following test is designed to be used only on vehicles equipped with power fold away side view mirrors.
1. Remove power mirror switch from mounting position.
Power Foldaway Mirror Switch
2. Using an ohmmeter, test for continuity between the terminals of the switch as shown in the tables.
NOTE: When testing using the chart be certain to read the chart correctly. Example - When testing left mirror "DOWN#", pins 1, 9, 10 will show
continuity to each other but not with 3, 4, 5.
3. If test results are not obtained as shown in the tables, replace the switch.
Extended Mirror Switch Circuit Test
EXTENDED MIRROR SWITCH CIRCUIT TEST
NOTE: MIRROR POSITION SWITCH MUST BE IN THE "EXTENDED" POSITION TO USE CHART.
