PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Sunroof / Moonroof Switch: Procedures
Switch - Sunroof
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the overhead console from the headliner.
3. Disconnect the switch electrical connector.
4. To remove the switch from the overhead console, push on the back of the switch until it comes free from the overhead console.
INSTALLATION
1. Install the switch in the overhead console assembly. Be certain the switch is securely snapped in place.
2. Connect the sunroof control switch electrical connector. Be certain the switch connector is securely snapped in place.
3. Install the overhead console.
4. Connect the battery negative cable.
5. Confirm proper sunroof system operation.
Sunroof Control Switch
REMOVAL
1. Using a flat blade tool, release switch from the headliner.
2. Disconnect the wire connector from the control switch.
INSTALLATION
1. Connect the wire connector to the control switch.
2. Install control switch into headliner.
3. Test sunroof operation.