PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Power Window Switch: Service and Repair
Rear - Sedan Only
REMOVAL
1. Disconnect and isolate the battery negative cable.
Window Switch Removal (Rear Shown - Front Similar)
2. Using a trim stick (special tool #C-4755) or equivalent, gently pry at the top of the switch.
Rear Window Switch - Sedan Only
3. Remove switch and disconnect electrical harness connectors.
INSTALLATION
1. Connect electrical harness connector to switch.
2. Align switch and press into position.
3. Connect battery negative cable.
