PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Wheel Bearing: Service and Repair
Front
DISASSEMBLY-STEERING KNUCKLE (WHEEL BEARING AND HUB)
NOTE: The removal and installation of the wheel bearing and hub from the steering knuckle is only to be done with the steering knuckle removed
from the vehicle using the following procedure.
1. Remove steering knuckle, hub, and wheel bearing as an assembly from the vehicle.
2. Three wheel studs across from one another require removal from the hub flange. Rotate the hub to align each wheel mounting stud with the notch
in the bearing retainer plate before removal. Using Remover, Special Tool C-4150A, press the three wheel mounting studs out of the hub flange.
Remove the wheel mounting studs from the hub through the open notch.