PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Fig.9 Rear Windshield Wiper Motor Remove/Install
8. Remove three bolts to the rear wiper motor and remove from vehicle.
CAUTION: Use extreme care when taking out motor. Damage to the grommet and or window can occur.
INSTALLATION
Before installation activate wiper system to ensure the wiper module is in the PARK position. Position wiper arm so that the tip of the blade is on the
park line on the glass.
NOTE: When servicing the rear wiper motor; replace all three rubber well-nuts.
1. Install three bolts to the rear wiper motor. Torque bolts to 1.2 Nm (10 in. lbs.).
2. Connect harness connector.
3. Install liftgate trim panel.
Fig.5 Rear Windshield Wiper Arm Remove/Install
4. Install the arm on the pivot while the arm is in an over/centered position.
