PT Cruiser L4-2.4L Turbo VIN G (2004)
Connecting Rod: Description and Operation
PISTON & CONNECTING ROD
DESCRIPTION
The pistons are made of a cast aluminum alloy.
The pistons have pressed-in pins attached to forged powdered metal connecting rods. The pistons pin is offset 1 mm (0.0394 inch) towards the thrust
side of the piston. The connecting rods are a cracked cap design and are not repairable. Hex head cap screws are used to provide alignment and
durability in the assembly. The pistons and connecting rods are serviced as an assembly.
OPERATION
The piston and connecting rod is the link between the combustion force to the crankshaft.
