PT Cruiser L4-2.4L Turbo VIN G (2004)
![background image](/chrysler/pt_cruiser/l4-2.4l_turbo_vin_g/Page-598001.png)
Oil Filter Adapter: Service and Repair
OIL FILTER ADAPTER
REMOVAL
1. Raise vehicle on hoist.
2. Place a suitable oil collecting container under oil filter.
3. Remove oil filter.
4. Remove filter adapter attaching bolts (Fig. 100).
5. Remove filter adapter and gasket (Fig. 100).
INSTALLATION
1. Clean all gasket sealing surfaces
2. Install gasket and filter adaptor to oil pan (Fig. 100). Tighten bolts to 12 Nm (105 inch lbs.).
3. Install oil filter.
4. Lower vehicle and check engine oil level. Adjust level as necessary.