PT Cruiser L4-2.4L Turbo VIN G (2004)
Turn Signal Lamp: Service and Repair
REMOVAL
Headlamp Access
1. Remove headlamp access cover in splash shield.
2. Rotate socket counterclockwise one quarter turn.
3. Remove bulb and socket from headlamp unit.
4. Disconnect wire connector from back of front side marker/park/turn signal lamp.
INSTALLATION
1. Connect wire connector to the back of front side marker/park/turn signal lamp.
2. Install bulb into headlamp unit
3. Rotate socket clockwise one quarter turn.
4. Test operation of lamps.
5. Install headlamp access cover into splash shield.