PT Cruiser L4-2.4L Turbo VIN G (2004)
![background image](/chrysler/pt_cruiser/l4-2.4l_turbo_vin_g/Page-1539004.png)
6. Remove split thrust washer separation pin (Fig. 144).
7. Remove 4th gear (Fig. 145).
8. Remove 4th gear caged needle bearing (Fig. 146). Check the caged needle bearing for a broken retention spring.
6. Remove split thrust washer separation pin (Fig. 144).
7. Remove 4th gear (Fig. 145).
8. Remove 4th gear caged needle bearing (Fig. 146). Check the caged needle bearing for a broken retention spring.