PT Cruiser L4-2.4L Turbo VIN G (2004)
![background image](/chrysler/pt_cruiser/l4-2.4l_turbo_vin_g/Page-1539010.png)
2. Press the input bearing out of the housing (Fig. 135).
INSTALLATION
1. Apply coating of Loctite sealant on bearing outer diameter. Position sleeve and bearing assembly at input bearing bore.
2. Install tool # C-4680-1 over input bearing (Fig. 136).
3. Using the spacer tool # 4894 and shop press, install input bearing into bore until it is fully seated (Fig. 137).