chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Engine Controls - Rough Idle/Sag/3,000 RPM Surge|Page 2793 > < Input Speed Sensor|Page 2784
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - Rough Idle/Sag/3,000 RPM Surge

NUMBER: 18-020-04

GROUP: Vehicle Performance

DATE: May 4, 2004

THE SOFTWARE WILL BE AVAILABLE ON TechCONNECT MAY 4, 2004.

FOR MARKETS OUTSIDE OF THE UNITED STATES AND CANADA, THE SOFTWARE AND REPROGRAMMING INSTRUCTIONS WILL
BE AVAILABLE ON ITIL/ISIS CD/DVD JUNE, 2004.

SUBJECT:
Flash: Engine Sag or Rough Idle or Vehicle Surge at Engine Speeds Around 3000 RPM

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software.

MODELS:

2001 - 2003

(PT)

PT Cruiser

NOTE:

This bulletin applies to all 2001 and 2002 PT vehicles equipped with a 2.4L engine (sales code EDZ) and a manual transmission.

NOTE:

This bulletin applies to all 2003 PT vehicles equipped with a 2.4L Turbo engine (sales code EDV) and a manual transmission.

SYMPTOM/CONDITION:

For all 2001 and 2002 PT vehicles equipped with a 2.4L naturally aspirated engine (sales code EDZ) and a manual transmission, the vehicle operator
may describe rough idle or engine sag during the first few vehicle launches while cold, ambient temperatures above above -6.6° C (20° F) or steady state
vehicle surge at engine speeds around 3000 rpm.

For all 2003 PT vehicles equipped with a 2.4L Turbo engine (sales code EDV) and manual transmission, the vehicle operator may describe rough idle or
engine sag during the first few vehicle launches while cold, ambient temperatures above -6.6° C (20°F).

DIAGNOSIS:

Using a Scan Tool (DRBIII(R)) with the appropriate Diagnostic Procedures Manual, verify all engine systems are functioning as designed. If DTCs are
present record them on the repair order and repair as necessary before proceeding further with this bulletin.

If the vehicle operator describes or experiences the Symptom/Condition, perform the Repair Procedure.

PARTS REQUIRED:

SPECIAL TOOLS/EQUIPMENT REQUIRED:

Engine Controls - Rough Idle/Sag/3,000 RPM Surge|Page 2793 > < Input Speed Sensor|Page 2784