Sebring V6-2.5L VIN N (1997)
Brake Shoe: Service and Repair
Brake Shoe Removal and Installation
NOTE:
1. Whenever the shoe and lining assembly is replaced, replace both RH and LH assemblies as a set to prevent car from pulling to one side when
braking.
2. If there is a significant difference in the thicknesses of the shoe and lining assemblies on the left and right sides, check the sliding condition of the
wheel cylinder piston.
Rear Drum Brake Components Removal
REMOVAL
1. Loosening the parking brake cable adjusting nut.
2. Drain the brake fluid.