Sebring V6-2.5L VIN N (1997)
![background image](/chrysler/sebring/v6-2.5l_vin_n/Page-459002.png)
REMOVAL
1. Remove under cover side panel. Refer to Body and Frame.
2. Release fuel pressure. Refer to Powertrain Management.
3. Follow removal steps outlined in the illustrations noting the following.
4. Remove the power steering oil pump with the hose attached.
NOTE: Suspend the removed power steering oil pump (by using wire or similar material) at a place where no damage will be caused during
removal/installation of the intake manifold.