Sebring V6-2.5L VIN N (1997)
Turn Signal Lamp: Service Precautions
Headlight, Front Turn Signal and Position Light Assembly
Plastic outer lenses are used for the headlight, front position light assembly, and so pay attention to the following items.
-
No brush the outer lens surface with a protruded tool.
-
Use the specified genuine parts; bulbs.
-
Don't apply the masking tape on the outer lens surface.
-
When carrying out aiming adjustment, do not cover the headlights for more than three minutes while they are turned on. Otherwise heat from the
bulb may warp the headlight lens.