Sebring V6-2.5L VIN N (1997)
Accelerator Pedal: Service and Repair
1. Disconnect accelerator cable from pedal -- 4 in image.
2. Remove cotter pin -- 5 in image.
3. Remove Washer -- 6 in image.
4. Remove accelerator pedal pin -- 7 in image.
5. Remove bushing -- 8 in image.
6. Remove spring -- 9 in image.
7. Remove accelerator pedal arm -- 10 in image.
8. Remove accelerator pedal bracket -- 11 in image
9. Remove accelerator pedal stopper -- 12 in image.
10. Reverse procedure to install
11. Adjust cable
