Sebring V6-2.5L VIN N (1997)
Vehicle Speed Sensor: Testing and Inspection
Automatic Transmission
Input Speed Sensor Resistance Check
Input Speed Sensor Resistance Check
1. Disconnect the input speed sensor connector.
2. Measure the resistance between the input speed sensor side connector terminals 1 and 2.
Standard value: 0.3 - 1.2 Kilo Ohms
3. If the resistance is outside the standard value, replace the input speed sensor.
Output Speed Sensor Resistance Check
Input Speed Sensor Resistance Check
1. Disconnect the input speed sensor connector.
2. Measure the resistance between the output speed sensor side connector terminals 1 and 2.
Standard value: 0.3 - 1.2 Kilo Ohms
3. If the resistance is outside the standard value, replace the output speed sensor.