Sebring V6-2.5L VIN N (1997)
cable within the clock spring may be severed, obstructing normal operation of the SRS.
POST-INSTALLATION INSPECTION
1. After installing the clock spring, the steering wheel, the column covers and the air bag module, check steering wheel for noise, binds or difficult
operation.
2. Reconnect the negative battery terminal. Turn the ignition key to the 'ON" position. Does the "SRS" warning light illuminate for about 7 seconds,
turn OFF and then remain OFF? If yes, SRS system is functioning properly.
CLOCK SPRING CHECK
If, as result of the following checks, even one abnormal point is discovered, replace the clock spring with a new one.
1. Check connectors and protective tube for damage, and terminals for deformation.
2. Visually check the case for damage.
3. Check for continuity between the No. 1 connector of the clock spring and connectors No. 3 and 4.