Sebring Convertible V6-2.5L SOHC 24 Valve (1996)
A.
Clamp the locking pliers onto the wiper arm locking tab. (See Figure 1)
B.
Work the locking pliers back and forth until the tab breaks away. (See Figure 2)
C.
File the rough edges to insure a smooth surface.
D.
Repeat for the other side if required.
7.
Install the wiper blade(s) on the wiper arm(s), by referring to the reference marks.
8.
Install the driver side wiper arm/blade assembly onto the pivot shaft. The tip of the blade should be 1-1/2" (40 mm) from the top of the cowl
screen.
9.
Install the passenger side wiper arm/blade assembly onto the pivot shaft. The tip of the blade should be 2" (50 mm) from the top of the cowl
screen. Figure 3
10.
Torque the washer arm nut(s) to 25-30 ft.lbs (35-40 Nm).
11.
Wet the glass using the windshield wiper system.
12.
Actuate the windshield wipers and watch the wiper arm/blade assemblies to insure proper operation. If the wiper arms appear to be slipping on the
pivot shaft, retorque the wiper arm nut.
13.
Raise the hood.
14.
Install the beauty cap(s) and close hood.