chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Cable Removal|Page 5389 > < Cable Removal|Page 5387
Page 5
background image

Compressing Park Brake Cable Retaining Tabs

18. Install the box end of a 1/2 in. wrench over the park brake cable retainer as indicated in. This will compress tabs on park brake cable retainer,

allowing cable to be removed from console bracket. From under carpet, grasp park brake cable housing and pull cable straight out of console
bracket.

19. Raise vehicle on jackstands or centered on a frame contact type hoist.
20. Remove rear wheel and tire assembly from the side of the vehicle requiring park brake cable service.

Rear Brake Drum

21. Remove the rear brake drum from the rear hub/bearing assembly.

Rear Hub/Bearing Dust Cap

22. Remove the dust cap from the rear hub/bearing assembly.

Cable Removal|Page 5389 > < Cable Removal|Page 5387