Sebring Convertible V6-2.5L VIN H (1997)
Parking Brake Cable: Service and Repair
Cable Installation
PROCEDURE
Park Brake Cable Removal/Installation At Floor Pan
1. Install the park brake cable into the floor pan. Make sure sealing grommet on park brake cable is installed in floor pan as far as possible to insure a
proper seal.
Park Brake Cable Routing Brackets (Left Side)
2. Install the 2 park brake cable routing brackets on the frame rail. Install and securely tighten the routing bracket attaching bolts.
3. Install the park brake cable into the rear brake support plate but do not lock the locking tabs on the cable attachment retainer into the brake support
plate.
Park Brake Cable At Actuating Lever
4. Install the park brake cable on the park brake actuating lever of the trailing brake shoe. Be sure the end of the spring is under the lip on the park