Sebring Convertible V6-2.5L VIN H (1997)
6. Insert the lash adjuster to rocker arm, being careful not to spill the diesel fuel. Then use the special tool to prevent the adjuster from falling while
installing it.
7. Temporarily tighten the rocker shaft with bolts at the condition that all the intake valve rocker arms do not push the valves.
8. Insert the rocker shaft spring from above and mount at right angles to the plug guide.
NOTE: Before installing the exhaust rocker arms and rocker arms shaft, mount the rocker shaft spring.
9. Remove the special tools used to hold the lash adjuster in position.
10. Check ensure that the flat side of the rocker shaft it directed as shown in the illustration.
