Sebring Convertible V6-2.5L VIN H (1997)
5. Install the engine support bracket on the front of the front suspension crossmember. Install the 2 support bracket to suspension crossmember
attaching bolts and tighten to a torque of 75 Nm (55 ft. lbs.).
6. Install bolt attaching engine support bracket to transaxle mounting bracket. Tighten bolt to a torque of 75 Nm (55 ft. lbs.).
7. Install the 2 bolts attaching the rear support bracket, for the under engine support bracket, to the rear of the front suspension crossmember. Tighten
bolts to a torque of 75 Nm (55 ft. lbs.).