Sebring Convertible V6-2.5L VIN H (1997)
Fig. 24
12. Install tie rod end into steering knuckle. Start tie rod end to steering knuckle attaching nut onto stud of tie rod end. While holding stud of tie rod end
stationary, tighten tie rod end to steering knuckle attaching nut. Then using a crowfoot and 11/32 socket, torque tie rod end attaching nut to 61 Nm
(45 ft. lbs.).
13. Install the 2 stabilizer bar bushing clamp to body attaching bolts and securely tighten.