Sebring Convertible V6-2.5L VIN H (1997)
shock absorber mount.
-
When compressing coil spring for removal from shock absorber assembly, the first full top and bottom coil of the spring must be captured by
the jaws of the coil spring compressor.
4. Compress shock assembly coil spring, using Professional Services Equipment Spring Compressor, GP-2020-C3.5 or an equivalent.
5. Hold the rod of the shock absorber from rotating using Shock Absorber Socket, Snap-On A136 or an equivalent. Then remove the shock absorber
shaft nut.
6. Remove the washer from the shock absorber upper mounting bracket.