Sebring Convertible V6-2.5L VIN H (1997)
5. Support brake caliper/adapter assembly using a wire hook and not by hydraulic hose.
6. Remove the rotor from the front hub.
7. Install a lug nut on the wheel stud to be removed from the hub/bearing assembly, so threads on stud are even with end of lug nut. Rotate hub so
stud requiring removal is aligned with notch cast into front of steering knuckle. Install Remover, Special Tool C-4150, or equivalent on hub and
bearing assembly flange and wheel stud.
8. Tighten down on special tool, this will push the wheel stud out of the hub and bearing flange.