Sebring Convertible V6-2.7L (2009)
Front Door Window Glass: Service and Repair
Front Door Glass - Removal
REMOVAL
1. Remove door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim
Panel - Removal.
2. Connect power window switch and lower window to approximately mid position. The lift plate glass retention clamps will align with holes in the
inner door panel.
3. On sedans, using a punch or equivalent, press tabs releasing glass from window regulator.
4. On convertibles, remove the rear mounting bolt and loosen the front retaining nut.
5. Remove glass from channel.
6. Raise glass (1) upward and out of the opening at top of door.
