Sebring Convertible V6-2.7L Flex Fuel (2008)
Front Door Panel: Service and Repair
Front Door Trim Panel - Installation
INSTALLATION
1. Position door trim panel near to door.
2. Connect door switch assembly connectors as necessary.
3. Engage clip attaching latch linkage to inside door handle.
4. Raise trim panel such that the backside of trim edge can be engaged with inner belt molding.
5. If equipped, install lock knob through the top of trim.
6. Press downward on top edge of trim panel while rotating bottom edge of panel towards door.
7. Position the locators at the top of the backside of the trim panel into the corresponding sheet metal holes ensuring fit.
8. Install screw (1) into inside handle cup.
9. Install screws (2).
10. Install the inside pull handle See: Front Door Handle/Front Door Interior Handle/Service and Repair/Front Door Interior Handle - Installation.
11. Install side view mirror flag See: Front Door Side View Mirror Flag/Installation.