Sebring Convertible V6-2.7L Flex Fuel (2008)
![background image](/chrysler/sebring_convertible/v6-2.7l_flex_fuel/Page-2742001.png)
Front Door Window Regulator: All Technical Service Bulletins
Body - Front Door Glass Service
NUMBER: 23-006-08
GROUP: Body
DATE: January 25, 2008
SUBJECT:
Front Door Glass Service - Attaching Fastener
MODELS:
2008
(JS27)
Sebring Convertible
DISCUSSION:
When performing front door glass service, the rear bolt and nut fastener must have thread locker installed to maintain proper nut and bolt torque. Mopar
Lock & Seal Adhesive BLUE p/n 04318031(6 ml tube) or equivalent is recommended. Torque both attaching nut/bolts to 8 N-m (71 In. Lbs).
NOTE:
Glass retainer rear bolt installed with improper torque and/or lack of thread locker may allow the fastener to loosen over time and cause glass to tilt
out of place and/or cause a rattle sound in the door.
POLICY:
Information Only
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.