Sebring Convertible V6-2.7L Flex Fuel (2008)
Convertible Top Control Module: Service and Repair
Module-Folding Top Chime
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Raise vehicle on a hoist, See: Maintenance.
3. Disconnect the power folding top chime electrical connector (4).
4. Remove the chime (1) by disengaging the push in retainer from the mounting hole (3) in the rear bumper (2) reinforcement.
Installation
INSTALLATION
1. Position the power folding top chime (1) onto the rear bumper reinforcement.
2. Secure the chime to the reinforcement by pushing down until the chime retainer is fully seated into he mounting hole (3).
3. Connect the power folding top chime electrical connector (4).
4. Lower the vehicle.
5. Connect the battery negative cable.