Sebring Convertible V6-2.7L Flex Fuel (2008)
13. With the presenter plate assembly (4) on the workbench, disconnect the folding top closed position switch electrical connector (3).
14. Mark the orientation of the right folding top header latch assembly (1) to the presenter plate (4) to ensure proper alignment during installation.
15. Remove the right folding top header latch assembly retaining nuts (2 & 5)
16. Remove the right folding top header latch assembly (1) from the presenter plate (4).
17. Remove the folding top closed position switch retaining screw (2).
18. Separate the switch (3) from the latch assembly (1).
Installation
INSTALLATION
1. Position the folding top closed position switch (3) onto the right folding top header latch assembly (1). Ensure the locating tab on the switch aligns
with the slot on the latch assembly.
2. Install the folding top closed position switch retaining screw (2).