Sebring Convertible V6-2.7L Flex Fuel (2008)
14.
Staple the bottom of the zipper to prevent separation.
15.
Install the rear lower section of seat back cover over its attachment.
16.
Check the other seat back cover zipper for separation at the bottom. Is zipper separating at the bottom?
a.
Yes >>> Repeat the Repair Procedure for the other seat starting with
b.
No >>> Continue with
17.
On the seat that is NOT separated, disconnect the J-Clip retainer across the bottom of the seat back cover.
18.
Staple the bottom of the zipper to prevent separation.
19.
Install the rear lower section of seat back cover over its attachment.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.