Sebring Convertible V6-2.7L Flex Fuel (2008)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
TPM Transponder - Installation
Front
FRONT
1. Position the transponder (1) and install the mounting nuts.
2. Connect the wiring harness connector (2) to the transponder.
3. Install the wheelhouse splash shield and all components removed to access it. See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair/Front Wheelhouse Splash Shield - Installation
4. Perform the TPM Diagnostic Verification Test. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic
Trouble Code Tests and Associated Procedures/Verification Tests/Tire Pressure Monitor (TPM) Verification Test
Rear
REAR