Sebring Convertible V6-2.7L Flex Fuel (2008)
5. Starting at a point on the airbag, work your way around the airbag until all the hooks have been released.
6. Remove driver airbag trim cover from driver airbag.
Airbag
AIRBAG
1. Connect the squib connectors (1) to the driver airbag (3).
2. Position the driver airbag (3) in the steering wheel (2) and push forward.
WARNING: Make sure not to pinch any wires underneath the driver airbag.
3. Install the two airbag retaining bolts (4). Tighten bolts to 10 Nm (89 in. lbs.).
4. Install the airbag bolt access covers.
WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. PERSONAL INJURY OR DEATH MAY RESULT IF THE