Sebring Convertible V6-2.7L Flex Fuel (2008)
9. Install the four mounting bolts (6) securing the front crossmember (1) to the body. Tighten the crossmember mounting bolts to 135 Nm (100 ft.
lbs.).
10. Sedan only - Tighten the crossmember reinforcement bracket mounting screws (8) to 50 Nm (37 ft. lbs.).
11. Convertible only - Tighten the crossbrace/reinforcement bracket mounting screws (1) to 50 Nm (37 ft. lbs.).
12. Remove the transmission jack.